Parker Vansco VMM1210, User Manual, Page: 58 / 80

48 VMM1210
Installation
Before mounting the VMM1210, review the following environmental and
mechanical requirements.
Note: Do not install the VMM1210 near any significant heat sources, such as
a turbo, exhaust manifold, etc. Avoid installing the VMM1210 near any drive-
train component, such as a transmission or engine block.
9.1.2.1. Environmental Requirements
The VMM1210 warranty does not cover damage caused by exposure of the
product to environmental conditions that exceed its design limitations.
1. Mount the VMM1210 in an environment that is within its ambient
temperature range of –40 °C to +85 °C.
2. Mount the VMM1210 in an environment that is within its particle ingress
rating. The sealing standard for the VMM1210 is EP455 level 1.
Note: The VMM1210 has not been tested for water ingress according to the
EP455 level 1 standard.
The VMM1210 is protected from aggressive pressure wash up to 1000 psi at 1 m
(3.28 ft.).
Warning! Damage to equipment. Exercise caution when pressure-
washing the VMM1210. The severity of a pressure wash can exceed the
VMM1210 pressure wash specifications related to water pressure, water
flow, nozzle characteristics, and distance. Under certain conditions a
pressure wash jet can cut wires.
9.1.2.2. Mechanical Requirements
Review the following mechanical requirements before selecting a mounting
location for the VMM1210:

The VMM1210 should be mounted vertically so moisture will drain away
from it.

The wire harness should have drip loops incorporated into the design to divert
water away from the VMM1210.

The harness should be shielded from harsh impact.

The harness should connect easily to the connector and have adequate bend
radius.

The labels and LEDs should be easy to read.

The VMM1210 should be in a location that is easily accessible for service.