background image

 

16

4.1 PRINTER 

PORT:

 The LabTec Methadone can be connected to a PC for control by the 

 

clinical software in use. An RS-232 Serial Cable (P/N 080-073) is used for this connection. 

 

Alternatively, a USB cable (090-158) may be used. 

4.2 SCALE 

PORTS:

 Not normally used by the LabTec Methadone unit. The male DB9 ports 

 

labeled “S1”, “S2” and “S3” are RS-232 ports for electronic scales. For the LabTec, 

 

only S1 is used. (Please do not remove the covers on the unused ports.)  This port 

 

allows you to interface with a number of different electronic scales: i.e. Mettler, Ohaus, 

 

and Sartorius top-loading scales. The following scale cables are required: 

 

Mettler:

 PGS, PM, Viper Models: P/N: 080-067PGS 

 

Ohaus:

 GT, “Precision Advanced”, “Explorer”, “Voyager” Models: P/N: 080-066 

 

Ohaus:

 IP Series High Capacity: P/N: 080-067 

 

Ohaus:

 Adventurer Pro Series: P/N: 080-067PGS 

 

Sartorius:

 Most Series Scales: P/N: 080-068 

In the LabTec Setup

: Scale mode, select the scale manufacturer; the LabTec will 

automatically implement the correct communications parameters. 

Check that the proper 

communications parameters are also implemented in the scale being used.

 

4.3

 

PRESSURE SENSOR PORTS:

 The LabTec Methadone unit does not make use of these 

 

jacks or Sensors. 

4.4

 

TEMPERATURE PROBE PORT:

 The LabTec Methadone unit does not make use of these 

 

jacks or Sensors. 

4.5

 

VALVE V PORT:

 Not used in conjunction with the LabTec Methadone. 

4.6

 

USB PORT:

 Used for connection to a PC, providing a Com Port. Can be used for data 

 

communication as an alternative to the Printer port. The USB driver is included on the CD 

 

that contains this manual. 

4.7

 

ETHERNET PORT:

 Not utilized by the LabTec Methadone Unit. 

4.8 

EXTERNAL I/O CONNECTOR:

 Not utilized by the LabTec Methadone Unit. 

Parts List: LabTec Methadone Dispenser Accessories: 

400-001M 

316SS Sinker: Prevents tubing from getting stuck to the inside of Methadone reservoir 

400-216 

Tygon Tubing: ¼ OD x 50 feet, tubing fits into RH1-CKC pump head. 

400-410 

Stand & Clamps: holds dispensing end of tubing. 

400-492 

Dispensing Tip (Fits Tygon tubing #400-216 above.) 

 

Call Parker Sales at 805-604-3400 for a pricing on these items, or to re-order. 

Summary of Contents for SciLog LabTec Series




























Reviews: