10
PSVG-IQAN-C2E1M1W1U1
Quick Start Guide
The security permissions are modifiable by an OEM or integrator, however the OEM
or integrator takes full responsibility to ensure that the proper safety guards are in
place to ensure that remote diagnostics cannot be performed in unsafe state.
2.2.3. Remotely Connecting to your IQAN system
After the PVSG-IQAN gateway has been installed, per section 3 and 4 of this
manual, the system is ready to connect. The user must next make sure the vehicle is
on, power is supplied to the system and the gateway is connected to the IQAN
Connect servers with the blinking green status light. There is no activation required,
the system will connect immediately.
Danger! Risk of death or injury.
Ensure that the vehicle is in a
safe state before performing remote diagnostics or program
updates.
The user can remotely connect with both IQAN Design and IQAN Run.
Once running IQAN Run or design, select Communication from the top dropdown
menu and select Connect Remote to open the Connect via Internet window. You
must have IQAN Connect licenses to use this service. Contact your PVSG-IQAN
supplier for details on how to acquire the licenses.
If this is the first time the user is remotely connecting to this device, they must add
the system key. This can be found in the system menu of the IQAN module. For
example on an MD4-7 the key is displayed in the System Info page. Select
Main
Menu
then
System
and finally
Info
. The key can also be used as a system
information channel and displayed elsewhere in the program.
Summary of Contents for PSVG-IQAN-C2E1M1W1U1
Page 42: ...34 PSVG IQAN C2E1M1W1U1 Markings Approvals 9 3 EU Declaration of conformity...
Page 43: ...User Guide 35 Markings Approvals...
Page 47: ......
Page 48: ...HY33 5027 IB US...
