XPR2/XPC2 PowerStation Series Hardware User Guide
Page 31 of 47
k. On the “Summary” screen, click
“Proceed”
to recover the selected image to the target drive.
Important!
—
After this point in the process, any data residing on the
target recovery drive will be overwritten.
l.
Progress bars will appear as the recovery image is copied to the target drive. This process will
require 5-6 minutes to complete depending on the size of recovery image to be restored.
m. Once the
“Restore operation succeeded.”
message appears, click
“OK”
.
n. Click the red
“X”
button in the extreme upper right corner of the screen to close Acronis. The
PowerStation will automatically reboot. Ignore any error or warning messages that may appear.
Note
—
During the reboot and at the moment of the reset beep, remove the
USB drive from the system to prevent the Acronis Recovery software from
executing again.
8) The removed Parker USB Flash drive can be used to restore additional XPC’s or retained for future
PowerStation CompactFlash card or hard drive recoveries. Attach a USB keyboard to the remaining USB
port.
9) After the reboot, Microsoft Windows XP will require several minutes to load for the first time. Follow the
Windows XP Setup Wizard localization and licensing steps. When prompted, carefully enter the 25
character Product Key from the Windows XP Pro for Embedded Systems License Certificate located on the
XPC2 backshell. When prompted, click
“Finish”
to complete the Setup Wizard. After a brief pause, the
system will reboot and then Windows XP will reload.