XPR2/XPC2 PowerStation Series Hardware User Guide
Page 18 of 47
Installing an Optional AC Power Supply
All XPR2/XPC2 PowerStation models support 24 volt input DC power. The XPR2/XPC206 PowerStation
models can support either 12 or 24 Vdc input power. In either case, you can operate any XPR2/XPC2
PowerStation with AC power by using an optional PX1-PWRAC Power Supply available from Parker. Use this
section only if you intend to operate the XPR2/XPC2 PowerStation using AC power.
Caution
—
Do not apply AC line input power directly to the unit or damage
may occur.
Preparing a Location for the AC Power Supply
Be sure to select a location that provides protection from dust, oil, moisture, and corrosive vapors. If your
enclosure is large enough, you can mount the Power Supply in the enclosure with the unit.
If you purchased Parker’s optional AC Power Supply, P1X-PWRAC and mounting kit BKT-1000, follow the
mounting instructions that came with the mounting kit to prepare your location for the power supply. Optionally,
the BKT-1000 can be used to mount the P1X-PWRAC to the back of the XPR2/XPC2 10” and 15” models.