XP Series PowerStation User Guide
1-1
I
NTRODUCTION
1
Thank you for purchasing an XP PowerStation. The XP PowerStation is a
rugged, compact PC that is designed to be used as an industrial operator
interface.
The XP PowerStation has an all-in-one PC board with Serial, Ethernet,
Audio Output, and USB ports. The XP PowerStation’s PC architecture allows
you to run Parker’s Interact Xpress software.
Please take time to review this manual and the other documentation
included with the XP PowerStation before operating the unit.
Using this Manual
This manual is designed to help you set up and use your XP PowerStation.
The manual lists the PowerStation’s specifications and describes its
replacement and optional components. It also explains how to install the
unit and how to maintain the unit in good condition.
This manual is divided into the following chapters:
Chapter 1 — Introduction:
Presents an overview of this manual, the
other documentation and software provided with the XP PowerStation, and
the steps necessary to get your PowerStation up and running. This chapter
also describes Parker’s customer support services.
Chapter 2 — Installing the PowerStation:
Explains how to select an
installation location, prepare for installation, and finally install the XP
PowerStation.
Chapter 3 — Starting Your PowerStation:
Describes the ports available
to connect the PowerStation to other devices and to a power source. And
then explains how to start up the PowerStation.
Chapter 4 — Maintaining the PowerStation:
Explains how to maintain
the XP PowerStation, including the touchscreen, replacing the
CompactFlash, performing internal maintenance, and accessing the
PowerStation utilities.
Appendix A — PowerStation Specifications:
Describes the XP
PowerStation’s specifications.