10
11
BLOW PIPE INSTALL
NOTE: The pipe is a tight fit to ensure that the vacuum is air tight!
1. Attach blow pipe B to the machine, rotate and screw to fix.
2. Attach blow A to B by rotating.
Blow pipe A
Blow pipe B
Push, twist and turn
ASSEMBLY
FILLING THE FUEL TANK
WARNING!
Danger of fire and burn injury!
■
Always use extreme care when handling petrol. It is highly
flammable.
■
Never operate this blower if fuel system components are
damaged
or are leaking.
■
Never attempt to refuel a hot engine! Always allow the
blower
engine to cool before refuelling!
■
Don’t smoke or light any fires near the blower or stored
fuel.
■
Always transport and store after ensuring the exhaust.
■
Only operate the blower after ensuring the exhaust is
functioning
properly.
■
Never operate the blower unless it is properly assembled
and in
good working condition.
FILLING PROCEDURE
1. Stop the machine, and place on the ground or on a sturdy work
surface, and wipe any debris from around the fuel cap.
2. Remove the fuel cap.
Remove the
fuel filler cap
