Parker PCH1 T P Series User Manual Download Page 84

Page: 84 / 107

Configuration Tool/Web Interface

5.1.9

IODD Configuration Screen

The “IODD Config” screen is used to upload an IODD file to the PCH Portal IODD library in the device

or delete an IODD file from PCH Portal IODD library. IODD files are loaded into the IODD library

regardless of what IO-Link port they are, or will be, connected to.

Navigation to IODD Configuration screen

IODD Config Screen

NOTE

After uploading an IODD file, device image and vendor logo gets updated automatically, but in

web interface user must upload the device image and vendor logo manually after uploading the

IODD file.

User does not need configuration access to upload/delete IODD files.

User can upload maximum 12 IODD files into the PCH Portal.

Summary of Contents for PCH1 T P Series











































































































Search results

Summary of Contents for PCH1 T P Series

Reviews:

Related manuals for PCH1 T P Series

Brands by name

Popular brands

Parker PCH1 T P Series, User Manual

Search results

Summary of Contents for PCH1 T P Series

Reviews:

Related manuals for PCH1 T P Series

Brands by name

Popular brands