Parker PCH1 T P Series, User Manual, Page: 23 / 107

Overview
23
The rotary switches are housed besides the USB port. The rotary switches are used to configure the PCH
Portal product for the following functionalities based on the rotary switch settings shown in Table 13.
Rotary Switch Configuration Details
Rotary Switch Configuration Details
Rotary Switch Setting Description
001 to 254
A setting of 001 to 254 on rotary switch and power cycle of PCH Portal enables the
PCH device to use static IP address. The last octet of the IP address is as per the
rotary switch setting and the first three octets is as configured in the config utility over
USB and web interface. (Factory Default IP: 192.168.1.8)
333
A setting of 333 on the rotary switch and power cycle of the PCH Portal allows config
utility over USB and web interface to configure all four octets of IP address of the PCH
Portal.
After IP address configuration through utility, power cycle of PCH Portal once again
results in PCH Portal to boot-up with IP address configured using the config tool.
387 Enable FTP
888
A setting of 888 on the rotary switch and power cycle of the PCH Portal configures
PCH Portal to use IP address assigned by DHCP server.
999
A setting of 999 on the rotary switch and power cycling the PCH Portal resets all the
configuration data to the factory default. IP 192.168.1.8
Out of range
A setting on rotary switch other than 000 to 255, 333, 387, 888 and 999 results in the
PCH Portal boot-up with last good IP address. The last good IP address is the IP
address used by the PCH Portal before last reset.