Parker MX80S Series, Product Manual

Page: 9 / 36

MX80S Series Product Manual
9
Parker Hannifin Corporation
EMN Automation - Parker
Irwin, Pennsylvania
Chapter 2 – MX80S Series Table Specifications
① Series CM05 Limits (only) w/ViX Connector (3 meter)
MX80S CM06 Stepper Motor & Limits w/ViX Connector (1 meter)
CM07 Stepper Motor & Limits w/ViX Connector (3 meter)
② Travel – mm CM08 Stepper Motor (no Limits) w/ViX Connector (1 meter)
T01 25 CM09 Stepper Motor (no Limits) w/ViX Connector (3 meter)
T02 50 CM10 Stepper Motor (E Drive) & Limits (1 meter)
T03 100 CM11 Stepper Motor (E Drive) & Limits (3 meter)
T04 150 CM12 Stepper Motor (E Drive) no Limits (1 meter)
CM13 Stepper Motor (E Drive) no Limits (3 meter)
③ Mounting CM15 Servo Motor, Encoder & Limits w/ViX Connector (3 m)
M Metric CM17 Servo Motor, Encoder (no Limits) w/ViX Connector (3 m)
④ Grade ⑩ Digital Option
S Standard E1 None
P Precision* E2 1 μ m Resolution
* Must order E3 or E4 Option to meet catalog specification. E3 0.5 μ m Resolution
E4 0.1 μ m Resolution
⑤ Bearing Type E5 5 μ m Resolution
J Standard Cross Roller E7 Sine Output
K ACS Cross Roller
⑪ Z Channel Location
⑥ Drive Type Z1 None
D1 1 mm Leadscrew
(1)
Z3 Center Position
D2 2 mm Leadscrew
(1)
D3 10 mm Leadscrew
(1,3)
⑫ Environmental
D6 2 mm Ballscrew
(2,3)
R1 Standard Finish (black anodized)
(1) Standard grade only (2) Precision grade only R2 Cleanroom Prep
(3) Not available with 1 - or 2 - stack stepper motor. R10 Low ESD Finish
R20 Low ESD Finish & Cleanroom Prep
⑦ Motor
M0 No motor, flange, coupling ⑬ Digital Drive
M1 NEMA 16 flange, no motor, coupling A1 No Drive
M14 Stepper, 1 stack, NEMA 11 A10 ViX250 - AE Servo (torque mode)
M15 Stepper, 2 stack, NEMA 11 A11 ViX250 - AE Servo (velocity mode)
M16 Stepper, 3 stack, NEMA 11 A12 ViX250 - AE Servo (step/direction mode)
M21 Servo, 1 stack, NEMA 16 A15 ViX250 - IE Servo Drive/Controller
A31 E - DC Stepper Drive
⑧ Home/Limit Switch* A35 ViX250 - IM Stepper Drive/Controller
H1L1 None
H2L2 N.C. Home/N.C. Limit ⑭ Axis Designator
H2L3 N.C. Home/N.O. Limit S1 None (single - axis)
H3L2 N.O. Home/N.C. Limit S2* X - axis base unit (cables @ 12 o ’ clock)
H3L3 N.O. Home/N.O. Limit S3* Y - axis 60 arc - sec (cables @ 3 o ’ clock)
*NC = Normally Closed; NO = Normally Open S4* Y - axis 60 arc - sec (cables @ 9 o ’ clock)
S5* Y - axis 15 arc - sec (cables @ 3 o ’ clock)
⑨ Cable Options (High - flex) S6* Y - axis 15 arc - sec (cables @ 9 o ’ clock)
CM01 None *Consult factory for S* options and quotation
CM02 Limits (only) w/Flying Leads (1 meter)
CM03 Limits (only) w/Flying Leads (3 meter) ⑮ Required Designator
CM04 Limits (only) w/ViX Connector (1 meter) X1
Cable options continued next column