Catalogue HY29-0037-M1/UK
Overall Hydraulic Motors, Fixed
M5AS - M5ASF Denison Vane Motors
18
Parker Hannifin SAS
VPDE, Denison Vane Motors
Vierzon - France
Place the quad seal on to the
end cap. (use some grease
to make sure the seal stays
in its position).
17 . Position the end cap.
Check that the seal remains
correctly placed on the end
cap.
Be careful with the dowel
pin positioning.
a) Always check if the shaft
rotates.
If not, disassemble and go
back to the previous step.
b) Check the porting confi-
guration (see table page
30).
c) Tighten the 4 screws step
by step to avoid damaging
the seals.
d) Always check if the shaft
rotates.
If not, disassemble and go
back to the previous step.
3 . 1 . DiSASSeMbly / ASSeMbly
3 . 1 . d ASSeMbly :
!
!
1
4
3
2
TigHTening Torque :
100 Nm
73.8 Ft.lbs
conversions
!
LUBRICATE
WITH
C
LE
AN
HY
DRAULIC FLU
ID
SU
ITA
B
LE
