Parker K Series, Technical Manual

Page: 2 / 66

2 - PVD 3674_GB_K Series_CE-November 2016.Docx
EU DECLARATION OF CONFORMITY
We ,
Parker Hannifin Manufacturing France SAS
Electromechanical & Drives Division Europe
Etablissement de Longvic
4 Boulevard Eiffel - CS40090
21604 LONGVIC Cedex - France
manufacturer, with brand name Parker , declare under our sole responsibility that the products
SERVOMOTORS TYPE K
satisfy the arrangements of the directives :
Directive 2014/
35/EU : “Low Voltage Directive”, LVD
Directive 2011/65/EU :
“Restriction of Hazardous Substances”, RoHS
Directive
2014/30/EU : “Electromagnetic Compatibility”, EMC
and meet standards or normative document according to :
EN 60034-1:2010/AC:2010 : Rotating electrical machines - Part 1 : Rating and performance.
EN 60034-5:2001/A1:2007 : Rotating electrical machines - Part 5 : Degrees of protection provided by
the integral design of rotating electrical machines (IP code) - Classification.
EN 60204-1:2006/AC:2010 : Safety of machinery
– Electrical equipment of machines – Part 1 : General
requirements.
The undersigned certify that the above mentioned model is procured in accordance with the above
directives and standards.
Further information :
Kit K shall be mounted on a mechanical support providing good heat conduction and not exceeding
40° C in the vicinity of the motor flange.
As K Series are the active parts of an incomplete motor, the design, the construction, the certification
and the final conformance of the complete motor is under the responsibility of the integrator.
The product must be installed in accordance with the instructions and recommendations contained in the
operating instructions supplied with the product.
C.E. Marking : October 2015
Longvic, November 18
th
2016 In the name of Parker
A. ANDRIOT
Quality Manager
Ref : DCE-K-001rev0