6
I.
Summary
1.1 Product Check
After receiving the AC servo drive, please check for the following:
Item
Content
Check for damage
Inspect the unit to insure it was not damaged during shipment.
Ensure that the product is
what you have ordered.
Verify the part number indicated on the nameplate corresponds with the part
number of your order
Accessories completeness
Ensure that the model and quantity of accessories are enough.
Ensure that the servo
motor shaft rotates freely.
Rotate the motor shaft by hand; a smooth rotation will indicate a good motor.
(However, a servo motor with an electromagnetic brake can not be rotated manually.)
1.2 Servo Drive Nameplate
Take IM20 series 11kW servo drive special for injection molding machine for the example:
V
Hz
A
11
Parker Hannifin Corporation
MODEL
INPUT
OUTPUT
IM20-S 0110T3E5F2D2B1 RCP3
AC
V
AC
0
～
INPUT
50/60
23
kW
0
～
590.0
Hz
IP20
3 PH
380
3 PH
www. parker. com
SW NO . 1. 36
BS NO. 3.00
Made in china
Parker Hannifin Motion and Control ( Wuxi ) Company Ltd , No. 200 , Furong Zhong Si Lu , Xishan
Economic Development Zone, Wuxi , 214192, Jiangsu, China
Fig 1-2 Servo Drive Nameplate
1.3 Servo Motor Nameplate
Take FM series 11kW servo motor special for injection molding machine for the example:
！
Caution
Never power on a physically damaged drive or motor.
Please ensure that both the servo drive and motor are correctly matched for size (power rating).
If any items are damaged or incorrect, please inform the distributor whom you purchased the product
from or manufacturer.
