Page
8
of 10
ECO-0364767
Rev: -
Installation and Operation Manual
EP
Series Pro
-B
loc
®
IPDE-IOM-EP-SERIES-PROBLOC
BALL VALVE HANDLE REMOVAL
Ball Valve handle removal/reinstallation
The ball handle may be removed without under loading the packing. To remove the handle
•
Unscrew the top nut (Dome/handle locking nut)
•
Handle may be removed.
To re-install the handle for valve operation:
•
Ensure shaft and nut threads are free from contaminants (including any used thread locker)
•
Replace handle
•
Apply Bondloc B272 or equivalent to nut threads ensuring good coverage.
•
Torque nut as follows:
Pro
-B
loc Size:
Top Nut Torque (Nm)
10mm (EPBY), 15mm (EPBW), 20mm (EPBV)
23 Nm
25mm (EPBV)
31 Nm
WARNING:
Ensure handle is correctly installed before operation of valve
HANDLE
TOP NUT
EEMUA Ball valve
SHAFT
STOP PIN
