Hydraulic Oil Filter
17(26)
EAPF 1
72.09.195.66 rev.B
Operation and Maintenance Instructions
Parker Hannifin Manufacturing Netherlands (Filtration) B.V.
9.3. Changing vent plug
Make sure that the system is switched off and safe before starting to
change or install a vent plug.
1. Make sure the system is safe.
2. Remove the vent plug.
3. Preassemble the new plug. Screw the
plug and collar fully into each other.
Note: This is left-handed thread!
4. Place the plug/collar assembly into the
nut.
5. Screw the plug into the housing. Making
sure to use the torque values as shown
in chapter 7.3.
6. Vent the filter housing, see chapter 9.5
Summary of Contents for EAPF 1
Page 26: ......
