Section 15 Analyzing Chart
Date
Inlet Flow (SCFM)
Model
Inlet Temperature
Serial No.
Purge Setting
Ambient Temperature
Compressor HP
Operating Temperature
100% Load
75% Load
50% Load
Short Cycle
E F G Test
PRESSURE (PSIG)
STATUS LIGHTS (X - WHEN ON)
Left
Purge
Right
Drying
Regenerating
Dew Point
Time
Tow er
Gauge
Tow er
Left
Right
Left
Right
press.
(Optional)
1 MIN.
2 MIN.
3 MIN.
4 MIN.
5 MIN.
6 MIN.
7 MIN.
8 MIN.
9 MIN.
10 MIN.
11 MIN.
12 MIN.
13 MIN.
14 MIN.
15 MIN.
16 MIN.
Perform each of the floowing check s once during left tower drying and once during right tower drying:
Is there a constant bleed of air from any of the control solenoid exhaust ports?
Which one?
Is there any constant bleed from the vent port on the inlet valve body?
Which one?
Is there any leakage from the on-line tow er (pressurized) exhaust valve?
Which one?
Is there any "back pressure" in the regenarating tow er?
PSIG_______________
Have you checked the condition of your coalesing pre-filter element?
Have you checked the auto drains on your separator, receiver and pre-filter to ensure proper drainage?
Summary of Contents for Airtek TW 10
Page 9: ...Sequence of Operation Drawings...
Page 10: ......
Page 38: ...Section 12 Wiring Diagrams...
Page 39: ......