3 - REV. B
SCP 1200 - 3000 USER GUIDE
1
Getting Started
Before unpacking/uncrating your new dryer, inspect the carton/crate for damage. Note any
damage on the freight bill. File notice of concealed damage if:
(a)
there are any dents in the cabinets
(b)
there is any sign of oil on the skid or floor
(c)
the refrigerant gauge shows NO pressure
(Upper right side – look for hole in packing)
File these claims with the carrier immediately!
Otherwise, proceed with unpacking/uncrating the unit.
1.1
Environmental & Location Considerations
Following these guidelines will help insure that your new dryer will provide safe and
reliable service.
•
Unless supplied for special conditions, all SCP dryers must be located indoors in
an area with an ambient temperature between 41 - 100ºF (5-37.7ºC) and free from
explosive and corrosive fumes. Three (3) feet (92cm) of space must be allowed
between all open grills, walls, or other objects.
If the dryer is installed in a confined area, an exhaust system must be provided to
eliminate re-circulation of hot atmospheric air.
•
High ambient temperatures affect the outlet dew point of the dryer. For every
10º of ambient temperature over 100ºF (37.7ºC) a decrease of 10% of dryer
performance is encountered with air cooled dryers. The unit must not operate
in an ambient of over 115ºF (46ºC). If ambient temperature conditions are over
100ºF (37.7º), water cooled dryers are recommended.
•
Unit must be installed indoors.
Summary of Contents for Airtek Smart Cycle Plus SCP1200
