LINK TechBox/TechCard Instruction Manual - HA470016 Issue 5
LA463610U003
TECHCARD
Chapter 6 – Troubleshooting
Health and Run LED’s
Health and Run are drive functions and are not associated with the operation of the technology
feature.
On the 605/690 frames A&B the techbox is mounted in place of the keypad or blank cover. The
Run and Health LED’s from the keypad are replicated on the face of the techbox. The bottom two
LED indicators for the module and network status.
On the 584SV, 605C, 690 frames C and above, 590+ the Run and Health LED’s are on the drive
itself. Located on the TechCard and the TechBox are 2 LEDs that indicate the status of the module
and the
LINK
network.
Module LED
This indicates the set-up state of the Technology Box/Option
LED STATE
FAULT
DESCRIPTION
OFF
No Power
If jumper J3 set for INT: Apply power to drive
If jumper J3 set for EXT: Apply external power
SLOW FLASH
(2 flashes/sec)
Fault during
initialization
Self Test failure
Module does not have a valid configuration
QUICK FLASH
(4 flashes/sec)
Off
LINK
network
Module was halted (probably by LINK tools)
Module is attempting to go on-line
Problem in the configuration (L-error, H-error
or duplicate address)
ON
None
Module is running its configuration and
communicating over the
LINK
network
6055-L-00
TECHBOX
6053-L-00
TECHBOX
Model No:
6055-L-00
Serial No: 1234567890ABCD
|||||| ||||||||||||||||||| |||||||||
Internal
External
TB1
24V
COM
GND
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
