5
LINK TechBox/TechCard Instruction Manual - HA470016 Issue 5
Transmit Strength Settings -
Switch (SW1)
Set this switch to select the transmission intensity of the light. Use the table below to choose the
position after determining the approximate length of the ‘transmit’ fiber optic cable to the next
LINK
element.
6055-L-00,
LA463610U00
Position
6053-L-00
Position
Intensity Transmit Range
CENTER
CENTER
LOW
0 – 20 m (0 – 66 ft)
UP
DOWN
MEDIUM 21 – 40 m (67 – 132 ft)
DOWN
UP
HIGH
41 – 60 m (133 – 196 ft)
CAUTION
Switch orientation is different for 6055-L-00, LA463610U003 and 6053-L-00. The
table above refers to “6055-L-00, LA463610U003 Position” and “6053-L-00
Position”, as viewed from the front of the drive with the Technology Option fitted
to the drive. Setting the transmit strength switch to the wrong setting will result in
incorrect light intensity and may cause the LINK network to malfunction.
Fitting the TechBox to the frame B 605 and 690+ Drives
WARNING!
Ensure that all power is off
prior to working on the drive
The option is supplied as a “6053-
L-00 Technology Box” which fits
into the front of the 605 and 690+
drive in place of the keypad or
blank cover.
•
Remove the terminal cover and
screws.
•
Plug the ribbon cable into the
back of the TechBox and into
the socket on the 605B or
690+B drive
•
Snap the TechBox into place in
the recess on the front of the
605B or 690+B
•
Make all user-wiring
connections. Connect all
shields to the ground post on the
chassis. Make a connection
from the TechBox TB1 ground
terminal to the ground post on the chassis.
•
Re-install the terminal cover securely with the screws.
Note:
If permanently using the keypad with the Technology Box fitted, mount the keypad
remotely using the Panel Mounting Kit with part number (6052). The connecting
lead enters the 605 Inverter through the gland plate.
IMPORTANT:
Remember to set the transmit strength setting on switch, SW1.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
