EMC Certification
6-1
506/507/508 - HA389427
Chapter 6
EMC
C
ERTIFICATION FOR
506/507/508
Certificates
506/507/508
EU
D
ECLARATIONS OF
C
ONFORMITY
Date CE marked first applied: 01.04.2000
EMC Directive
Low Voltage
Directive
Issued for
compliance with
the EMC
Directive when
the unit is used
as
relevant
apparatus
.
In accordance with the EU Directive
2014/30/EU
We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual (provided with each piece of
equipment) is in accordance with the relevant
clauses from the following standard:-
* BSEN61800-3 (2004)
In accordance with the EU Directive
2014/35/EU
We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual
(provided with each piece of equipment), is in
accordance with the relevant clauses from the
following standard :-
EN50178 (1998)
The drive is CE
marked in accordance
with the low voltage
directive for electrical
equipment and
appliances in the
voltage range when
installed correctly.
M
ANUFACTURERS
D
ECLARATIONS
EMC Declaration
Machinery
Directive
This is provided
to aid your
justification for
EMC
compliance
when the unit is
used as a
component.
We Parker Hannifin Manufacturing Limited,
address as below, declare under our sole
responsibility that the above Electronic
Products when installed and operated with
reference to the instructions in the Product
Manual (provided with each piece of
equipment) is in accordance with the relevant
clauses from the following standard:-
* BSEN61800-3 (2004)
The above Electronic Products
are components to be incorporated into
machinery and may not be operated alone.
The complete machinery or installation using
this equipment may only be put into service
when the safety considerations of the Directive
2006/42/EC are fully adhered to.
Particular reference should be made to
EN60204-1 (Safety of Machinery - Electrical
Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual must be
adhered to.
Since the potential
hazards are mainly
electrical rather than
mechanical, the drive
does not fall under the
machinery directive.
However, we do
supply a
manufacturer's
declaration for when
the drive is used (as a
component
) in
machinery.
Date 01 June 2016
Dr Martin Payn
EME Division Engineering Manager
*
.
* Compliant with the immunity requirements of the Standard without specified EMC filters
.
Parker Hannifin Manufacturing Limited, Automation Group,
Electromechanical Drives Business Unit,
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44(0)1903 737000 FAX: +44(0)1903 737100
Registered Number: 4806503 England. Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ
