Parker 506 Series, Product Manual

Page: 33 / 39

6-2
Certification for the 506/507/508
506/507/508 - HA389427
Certificates
506/507/508
EC D
ECLARATIONS OF
C
ONFORMITY
Date CE marked first applied: 01.04.2000
EMC Directive Low Voltage
Directive
Issued for
compliance with
the EMC
Directive when
the unit is used
as
relevant
apparatus .
In accordance with the EEC Directive
2004/108/EC
We Parker SSD Drives, address as below,
declare under our sole responsibility that the
above Electronic Products when installed and
operated with reference to the instructions in
the Product Manual (provided with each piece
of equipment) is in accordance with the relevant
clauses from the following standard:-
* BSEN61800-3 (2004)
In accordance with the EEC Directive
2006/95/EC
We Parker SSD Drives, address as below,
declare under our sole responsibility that the
above Electronic Products when installed and
operated with reference to the instructions in
the Product Manual
(provided with each piece of equipment), is in
accordance with the relevant clauses from the
following standard :-
EN50178 (1998)
The drive is CE
marked in
accordance with the
low voltage
directive for
electrical
equipment and
appliances in the
voltage range
when installed
correctly.
M
ANUFACTURERS
D
ECLARATIONS
EMC
Declaration
Machinery
Directive
This is provided
to aid your
justification for
EMC
compliance
when the unit is
used as a
component.
We Parker SSD Drives, address as below,
declare under our sole responsibility that the
above Electronic Products when installed and
operated with reference to the instructions in
the Product Manual (provided with each piece
of equipment) is in accordance with the
relevant clauses from the following standard:-
* BSEN61800-3 (2004)
The above Electronic Products
are components to be incorporated into
machinery and may not be operated alone.
The complete machinery or installation using
this equipment may only be put into service
when the safety considerations of the Directive
89/392/EEC are fully adhered to.
Particular reference should be made to
EN60204-1 (Safety of Machinery - Electrical
Equipment of Machines).
All instructions, warnings and safety
information of the Product Manual must be
adhered to.
Since the potential
hazards are mainly
electrical rather
than mechanical,
the drive does not
fall under the
machinery
directive. However,
we do supply a
manufacturer's
declaration for
when the drive is
used (as a
component ) in
machinery.
Dr Martin Payn (
Conformance Officer)
* Compliant with the immunity requirements of the Standard without specified EMC filters .
* 690PB only when fitted with an internal or external filter.
PARKER SSD DRIVES
NEW COURTWICK LANE, LITTLEHAMPTON, WEST SUSSEX BN17 7RZ
TELEPHONE: +44(0)1903 737000 FAX: +44(0)1903 737100
Registered Number: 4806503 England. Registered Office: 55 Maylands Avenue, Hemel Hempstead, Herts HP2 4SJ