401/402XR Series Product Manual
Appendix A - Internal Protection
27
www.parkermotion.com
Parker Hannifin Corporation
1140 Sandy Hill Road
Irwin, PA 15642
Using the "IP Ship Kit"
All standard configurations will pass IP20 specifications with the following exception:
All standard configurations can be
configured to pass IP30 specifications by utilizing the “IP ship
kit” supplied with each unit as follows:
•
Using the supplied
aluminum foil disks
, cover all
counter-bored base mounting holes
that are not covered
by your mounting surface. The disks should be installed from the outside of the unit. Depending on the
travel length, some disks will not be used. Use the 0.75 inch diameter disk to cover the large hole on the
drive end of the unit.
•
Using the supplied
aluminum foil disks
, plug any
exposed holes on side covers
of the unit. The number
of holes on the side covers will vary with the options ordered.
