18
HDK-MT350_EN_06
Transportation, installation and storage
Danger due to incorrect transportation!
The dryer must be transported by authorized and qualified specialist
personnel only. During transportation all applicable national regulations
for accident prevention must be complied with. Otherwise there is a risk
of personal injury.
Danger of toppling over!
The dryer has a very high centre of gravity.
The dryer toppling over can cause serious injuries.
Secure the dryer for transportation and while loading and unloading to
prevent it toppling over.
Dryers are delivered upright, bolted to a pallet
(exceptions are possible for air or ship transportation).
The position of the dryer centre of gravity is specified on the packaging.
The openings in the dryer must remain closed off with plugs to prevent
moisture getting into the dryer.
Only use suitable and technically perfect lifting gear with a sufficient carrying
capacity.
The manufacturer will not be liable for any damage caused by incorrect storage
or incorrect transportation. Please note therefore the following instructions as well
as the storage instructions on page 21.
If the packaging is undamaged
The undamaged packaging should be removed only at the final installation site,
as it offers protection against any weather influences.
What to do in the case of transport damage occurring?
► Check whether only the packaging or the dryer itself were damaged.
► Inform the haulier immediately in writing of any damages.
► Also immediately contact your distributor for the purpose of
reporting/registering the damage.
Attention!
A damaged dryer must not be taken into operation! Damaged components
may lead to functional faults and possibly cause further damage.
