11
Page 5
Date/Time:
set the date and time to be used for Time Stamp.
Auto Power Off:
amount of time before the camera automatically turns itself off. The camera will
not automatically shut off while in Video Lapse or Capture Mode. If Motion Detection is turned
On or while recording. Choose 3, 5 or 10 minutes or Off to shut off the camera manually. The
default setting is 3 minutes.
Keypad Tone:
turns Keypad Tone On or Off when pressing camera buttons. Default is On.
Screensavers:
the amount of time before the screen goes dark while the camera remains on.
Choose 30 seconds or 1, 3 or 5 minutes. Choose Off if you want the screen to stay on anytime the
camera is on. The default setting is 1 minute.
Frequency:
frequency of household electricity. Choose 50Hz or 60Hz. The default setting is 50Hz.
Choose 60Hz in the US.
Rotate:
rotates your photos and videos 180 degrees. Use this if you need to mount the camera
upside down. Choose On to rotate. The default setting is Off.
Page 6
WIFI SSID:
name of camera WiFi network.
WIFI Password:
initial factory setting is 12345678. Change to any combination of up to 8 letters
and numbers or leave blank for no password.
Language:
select among several languages for display and menus. Default is English.
Delete:
delete all or selected images and videos except protected videos.
Format:
formats the memory card. Format a new card when you insert it into the camera for the
first time.
(
CAUTION: All videos and photos including protected videos are deleted when you
format the memory card
)
.
Default Setting:
returns camera settings to defaults.
Page 7
Version:
shows the model name, firmware version, date of firmware and Trademark.
NOTES FOR SETUP MENU
Not all settings are retained after you turn off the camera. Check your settings when you turn the
camera on again.
Resets to default when the camera is turned off.
This feature is disabled during WiFi operation.
Images larger than 3M are resized by interpolation.
This setting can't be adjusted during WiFi operation.
The WiFi app is always in English.
When you remove and replace the battery, the time resets to 00:00:00 and the date resets to
default. Sometimes it resets to the current date and time when the camera is connected to a
smart device via WiFi.
When you select Default Settings the WiFi network name resets to original factory name.
