3
DESIGN FEATURES
Physical Design
The amplifier is enclosed in a metal (steel) case of 44 mm (1U) height. The amplifier is
designed to be standard rack-mounted (19"
rack).
Power Supply Unit
All four channels of the amplifier share the same switching power supply unit.
Cooling System
Natural. Individual for each pair of channels and power supply.
Power Amplifier
Class D power amplifier
.
Balanced Inputs
The use of balanced inputs provides for an essential reduction of the environment-
induced hum and noise interference with long input connecting cables.
Line Outputs
(only for
TA604D
,
TA604DL
)
The line outputs have a post-
DSP
signal. The signal parameters are determined by
the selected preset setting. You can change the signal parameters and presets using the
USB
interface.
DSP
(only for
TA604D
,
TA604DL
)
Built-in
DSP engine
, installed into amplifier, ensures digital filtering, separation into
frequency bands, optimal EQ, time alignment, as well limiting and speakers overload
protection.
The parameters set up is performed by personal computer, connected via
USB
-interface
,
by means of
Park Editor
(
software does not require installation
).
The software and Owner’s Manual can be downloaded on
parkaudio.ua
(
«
Downloads
»
in
TA604D
,
TA604DL
section
)
.
«
»
Moreover, in the Video section you can
find
tutorials on amplifiers settings by means of
Park Editor.
Gain Controls
These allow setting the required level for each amplifier channel. The controls are
located on the rear panel.
Detachable Power Cord
This feature is provided for convenience of transportation and rack mounting.
Remote Level Controls
(only for
TA604D
,
TA604DL
)
The amplifier has function of wired remote level control, which ensures convenient
control, when placing the amplifier in the 19"rack or at the place, where access to the rear
panel is difficult.
