PARK AUDIO RX Series, Owner'S Manual

Page: 4 / 20

2 2
GENERAL
The four-channel professional power amplifier RX9d is designed for sound signal
high-fidelity amplification within professional sound reproduction systems.
The amplifier is equipped with built-in DSP engine ( DFM audio , Germany), which
provides the precision processing of the audio signal. To control the parameters of the
amplifier (or group of amplifiers) the program
NetControl is used, the amplifiers are
connected via the ETHERNET interface.
To ensure faultless operation of amplifiers, please, take time to read this Manual
before use.
WARNING!
Make sure to take all precautions where required.
Please, follow all instructions and guidelines.
To avoid any risk of electrical shock and/or fire hazard, please, do not expose this unit
to rain or moisture. Do not use this unit near open water.
Use dry cloth to clean the unit.
Do not block fan vents.
Do not place the unit near heating radiators, furnaces or other heat-emitting devices.
Do not connect this unit to an ungrounded power supply line.
Protect the power cord against damage.
Disconnect the unit from power supply in case of thunder or during downtime.
In case of malfunctioning, caused by water or any other foreign matter inside or when
the unit has been dropped, or the power cord has been damaged, or the unit has
been found faulty, please, consult qualified personnel.
WARNING!
The amplifier yields high output power. The manufacturer shall not be held respon-
sible for any damage to the speakers caused by excessive power from the unit.
UNPACKING
The manufacturer’s quality control system provides for careful examination of each
product before it leaves the factory to ensure its flawless appearance. After unpacking,
please, check the unit for any physical damage. In case of damage, please, contact your
local dealer. Keep the shipping carton and all packing material, as you may require them
for reshipment of the unit.