PARK AUDIO RX Series, Owner'S Manual

Page: 11 / 20

REAR PANEL
INPUTS ( Ch1/AES1-2, Ch 2/AES3-4 , Ch 3, Ch 4 ) – balanced inputs ( XLR
female). For analog signal connection Ch1/AES1-2, Ch2/AES3-4, Ch3, Ch4
are used. For digital signal connection Ch1/AES1-2 and Ch2/AES3-4 are
used.
Analog/digital signal choise is performed via local amplifier interface or
NETControl software.
Output fan grill.
SPEAKER OUTPUTS – output SpeakOn connectors for speakers
connection. Connectors pin assignment are marked on the amplifier rear
panel.
MAINS IN – mains cable connector.
THRU – line outputs. Used for sending the input signal to another amplifiers.
In analog signal mode THRU connectors are parallel to corresponding
INPUTS (Ch1/AES1-2, Ch2/AES3-4, Ch3, Ch4). In digital mode THRU
connectors (Ch 1/ A E S 1-2 , C h 2/ A E S 3-4 ) are linked to corresponding inputs
via buffer amplifier.
ETHERNET 1, ETHERNET 2 –
RJ45 connectors for ETHERNET network
connection.
1 2 3
9
4
5 8
6 7 10 11
12 17 13 16
Ch 3 Ch 4
INPUTS
THR
U
ETHERNET 2 ETHERNET 1
Ch 1 / AES 1 -2 Ch2 / AES 3 -4
3 1 4 2 5 8 6 7 9
11 10
Serial No
17 12 16 15 14 13
17 16
9