Player Rods
Rod Caps, Washers,
and Bushings
Brass Score Beads
Players
Player Rod Handles
Stoppers, Bolts, and Lock
Nuts
Ball Drop Cups and Bolts
Table Leg Bolts
Table Legs
2 - 40” 5 Player rods
4 - 45” 3 Player & goalie player rods
2 - 49” 2 Player rods
8 - .625” End cap
16 - .625” Washer
16 - .625” Rubber bushing
2 - Scoring sets
2 - Soccer balls
11 - Blue players
11 - Red players
22 - .75” Bolts & lock nuts
8 - Handles
8 - Handle bolts (flat head)
4 - Stoppers
4 - .875” Bolt & lock nuts
2 - Ball drop cups
6 - .75” Screws
20 - 1” Surface screws
4 - Wooden legs with PVC casings
4 - Adjustable footers
16 - 1/4” x 2-3/4” Lag bolt
1 - Allen wrench
Adult assembly and supervision required.
Table and Leg Assembly
Lay side and end panels on upper edge lining up the dowel pin as
-
sembly. Tap in place with rubber mallet to prevent damage to panel
surfaces.
Insert white PVC corner surface panels. Align end lip so that panels
are flush Diagram 1a.
Carefully lay soccer surface panel so that the ends are even over
the goal panel.
Parts List
Inventory all parts prior to table assembly.
*Contains small parts – Choking hazard.