Park & Garden LS400M-F, Manual

Page: 37 / 48

37
English
ELECTRICAL CONNECTION
The power supply must be 230V - 50 Hz. Extension cords up to 25 meters long must have cross diameter of 1.5 mm2.
Extension cords of more than 25 m must have a diameter of at least 2.5 mm2. The main supply must have a slow 16 A
fuse. Check the electrical wiring regularly for damage. Ensure that the power cord is not connected to the power source
when checking them. Electrical conductors must comply with the relevant VDE and DIN regulations. Only use extension
cords with code H 07 RN. The type description must be printed on the cord according to the regulations.
SAWBLADE ADJUSTMENT
Before starting, the blade must be centered between the two cheeks of the carter, if needed:
• Unscrew the 4 screws of the engine maintenance,
• Adjust the positioning of the engine (right or left) in order to focus the blade.
• Tighten the screws.