Park & Garden LS400M-F, Manual

Page: 26 / 48

26
English
TECHNICAL SPECIFICATIONS
MODEL LS400M-F
Rating 230V~50Hz S6/40%
Power 2200 W
Cutter capacity Ø30-Ø135mm
Blade diameter Ø405mm×Ø30mm×3.2mm×32T
Lydeffekt, LwA 104 dB(A)
Lydtrykksnivå, LpA 92 dB(A), K=4 dB
IP-class IP54
Weight 32 KG
LWA=93dB(measured value)
Associated uncertainty K=4dB
Measurement made in accordance with ENO 3746:1995
The figures quoted are mission levels and are not
necessarily safe working levels. Whilst there is a
correlation between the emission and exposure levels, this
cannot be used reliably to determine whether or not further
precautions are required. Factors that influence the actual
level of the workforce include the characteristics of the
work room, the other sources of noise etc.i.e. the number
of machines and other adjacent processes.
Also the permissible exposure level can vary from country
to country. This information, however, will enable the user
of the machine to make a better evaluation of the hazard
and risk
DESCRIPTION
1. Sliding support
2. Working table
3. Motor
4. Blade inner guard
5. Blade outer guard
6. Support leg
7. Spanner (2 pcs)
8. ON/OFF switch
9. Extended holder
10. Guide plate
11. Locking knob
12. Table cover
ASSEMBLY
WARNING!
To prevent accidental starting that could cause
possible serious personal injury, assemble all parts to your
machine before connecting it to power supply.
This machine should never be connected to power supply
when you are assembling parts, making adjustments,
installing.
• Carefully remove all parts from the carton and place the
machine on a level work surface. Separate and check
against the list of loose parts.
• If any parts are missing, do not operate this machine
until the missing parts are replaced. Failure to do so
could result in serious personal injury.
• Do not discard the packing materials until you have
carefully inspected the machine, identified all parts, and
satisfactorily operated this machine.