Park & Garden LS400M-F, Manual

Page: 24 / 48

24
English
SIKKERHETSREGLER
UNDERSTAND YOUR CUTTER
Read and understand the owner’s manual and labels
affixed to the cutter. Learn its application and limitations as
well as the specific potential hazards peculiar to it.
DRUGS, ALCOHOL AND MEDICATION
Do not operate the cutter while under the influence of
drugs, alcohol, or any medication that could affect your
ability to use it properly.
AVOID DANGEROUS CONDITIONS
Keep your work area clean and well lighted. Cluttered
areas invites injuries. Do not use the cutter in wet or damp
areas or expose it to rain. Do not use it in areas where
fumes from paint, solvents or flammable liquids pose a
potential hazard.
INSPECT YOUR CUTTER
Check your cutter before turning it on. Keep guards in
place and in working order. Form a habit of checking to
see that keys and adjusting wrenches are removed from
tool area before turning it on. Replace damaged, missing or
failed parts before using it.
DRESS PROPERLY
Do not wear loose clothing, gloves, neckties or jewelry
(rings, wrist watches). They can be caught in moving parts.
Protective electrically non conductive gloves and non-skid
footwear are recommended when working. Wear protective
hair covering to contain long hair, preventing it from get
caught in machinery.
PROTECT YOUR EYES AND FACE
Any cutter may throw foreign objects into the eyes. This
can cause permanent eye damage. Always wear safety
goggles. Everyday eyeglasses have only impact resistant
lenses. They are not safety glasses.
EXTENSION CORDS
Improper extension cord may cause fire and / or electric
accidents. Improper extension cord can cause the saw to
work poorly, which in turn can cause overheating.
Ensure that the cross-section of the extension cord is
sufficient for the power supply of the motor.
The conductors should normally have a cross section of at
least 1.5 mm². If the cord is longer than 20 m, the cross
section must be at least 2 mm². Do not use connections
that are not properly insulated. The connections must be
suitable for outdoor use.
AVOID ELECTRICAL SHOCK
Check that the electric circuit is adequately protected and
that it corresponds with the power, voltage and frequency
of the motor. Check that there is a ground connection,
and a regulation differential switch upstream. Ground the
cutter. Prevent body contact with grounded surfaces: pipes,
radiators, ranges, and refrigerator enclosures. Never open
the pushbutton box on the motor. Should this be necessary,
contact a qualified electrician. Make sure your fingers
do not touch the plug’s metal prongs when plugging or
unplugging the log saw.
KEEP VISITORS AND CHILDREN AWAY
The cutter must be always operated by one person only.
Other people should keep a safe distance from the work
area, especially when the log saw is under operations.
Never use another people to help you with freeing jammed
log.
DON’T FORCE TOOL
It will do a better and safer job at its design rate. Don’t use
the cutter for a purpose for which it was not intended.
DON’T OVERREACH
Floor must not be slippery. Keep proper footing and
balance at all times. Never stand on cutter. Serious injury
could occur if the cutter is tipped or the blade or other
moving parts are unintentionally contacted. Do not store
anything above or near the log saw where anyone might
stand on the tool to reach them.
AVOID INJURY FROM UNEXPECTED ACCIDENT
Do not attempt to load the log on until the log pusher
has stopped. WARNING! Keep hands out of the way of all
moving parts.
PROTECT YOUR HANDS
Keep you hands away from blade and cracks which open
in the log; They may close suddenly and crush or amputate
your hands. Do not remove jammed logs with you hands.
NEVER LEAVE CUTTER RUNNING UNATTENDED
Don’t leave tool until it has come to a complete stop.
DISCONNECT POWER
Unplug when not in use, before making adjustments,
changing parts, cleaning, or working on the log saw;
Consult technical manual before servicing.
MAINTAIN YOUR CUTTER WITH CARE
Keep the log saw clean for best and safest performance.
MAKE THE WORKSHOP CHILDPROOF
Lock the shop. Disconnect master switches. Store the log
saw away from children and others not qualified to use it.