Park Air Systems T6T, User Documentation

Page: 103 / 118

T6T VHF 100 W Transmitter Page 25 Maintenance
Back to Transmitter
Main Page
Fig 3 Blank VFP Screen
(3) At the Menu Bar, click on Serial Port and select either Com 1 or Com 2. The selection must
correspond to the port used to connect to the radio.
(4) Load the required information from the radio, or from a stored file. The required information can
be radio settings, frequency channels, BIT information, or all of these.
To load a previously stored file, select File > Open > All
or,
File > Open >Settings
or, File > Open > Channel
or, File > Open > BIT
To load information from the radio, select Radio > Retrieve > All
or,
Radio > Retrieve > Settings
or, Radio > Retrieve > Channel
or, Radio > Retrieve > BIT
(5) If required, amend any radio Settings or Channel information.
(6) Download the radio’s profile as shown on the VFP screen to either the radio, or to a file.
To download into the radio, select Radio > Send > All
or,
Radio > Send > Settings
or, Radio > Send > Channel
To download to a file, select File > Send > All
or,
File > Send > Settings
or, File > Send > Channel
or, File > Send > BIT