MAGNAIR questions? Contact the Sunovion Customer Service line (1-888-394-7377).
10
Instructions for Use
For use with LONHALA
TM
(glycopyrrolate)
Inhalation Solution
Fig. D6a
Connect the Connection
cord to the Controller.
D6a. Connect the Controller to the Handset
body using the Connection cord.
• One end of the Connection cord has
a blue round connector. Insert the
Connection cord into the inlet on the
blue side of the Controller. Push the
Connection cord in as far as it will go.
You may hear a slight Click if inserted
correctly.
See Fig. D6a.
Fig. D6b
Connect the other end of the
Connection cord to the Handset body.
D6b. Connect the Controller to the
Handset body using the
Connection cord as shown.
• The other end of the Connection cord
is blue and gray. Insert the Connector
(with gray mark facing up) into
the Handset body as far as it will
go, ensuring the gray mark on the
Connection cord lines up with the
blue mark on the Handset body.
• Check that the ends of the Connection
cord are fully inserted into the
Controller and the Handset body.
If they are not, the Handset may not
work properly.
See Fig. D6b.
Gray mark
D. ASSEMBLING YOUR MAGNAIR (cont.)
Blue inlet
Connection
cord
Blue mark
Connection cord
