3.
* Lock bottom #5 to skirting #4. By
tightening Cams.
* Lock back #3 to bottom #5 and skirting #4.
By tightening Cams.
* Lock top rail #8 to top #1 with screws.
* Lock end #7 to back #3, bottom #5 and
skirting #4. By tightening cams.
* Lock end #7 to back #2. By tightening
cams.
*
Lock end #6 to backs #2, #3, bottom #5,
skirting #4. By tightening cams.
* Lock top #1 to ends #6, #7 and back #2.
By tightening cams.
*
Screw top rail #8 to underside of top for
door to close on to. Make sure the top rail is
flush with front edge of end panels.
* Insert trim caps inside unit where needed.
Refer to Diagram 3
Refer to Diagram 2
Step 1 - Cabinet Assembly
* Using hammer, tap cams into 20mm holes in all panels where required . Important : Orientation of cams as shown in photo below.
* Screw cam bolts into 5mm holes in all panels where required.
Hammer fix cam in place.
Screw fix cam bolt into 5mm holes.
DIAGRAM 2
DIAGRAM 3
1.
Top
8.
Rail
7.
End
3.
Back
5.
Bottom
4.
Skirting
6.
End
2.
Back
