Skirting
Board
Wall
Cut skirting recess
before pushing cabinet
against the wall
End Panel
Front Panel
Base
Panel
DETAIL B
Fastening to wall
DETAIL A
Wall plugs
Refer to detail B
Refer to detail A
4.
Step2 - Fixing Cabinet To Wall
* Lay cabinet face down with bottom facing the wall.
* To ensure the cabinet is flush against the wall when upright, it may be necessary to cut a recess
into bottom of left and right hand end of cabinet.
* Place cabinet into position against the wall and, using a spirit level against either the right or left hand end and the top,
find the correct vertical and horizontal position. Mark this position on the wall with a pencil.
PLEASE NOTE
As there is a lot of tension in the Wallbed when in the open position, it is
very important that the cabinet is securely fixed to the wall.
IMPORTANT NOTE: Before moving cabinet upright, ensure all cams are tightened securely.
FASTENING OPTIONS 1
(for gyprock, fibro or timber walls)
FASTENING OPTIONS 2
* Ensure cabinet is in correct vertical position.
Drill holes in top of back panel at top in appropriate
position.
* Using a 65mm masonry bit, drill holes into wall and
insert wall plugs supplied.(see above)
* Move cabinet back into place against wall.
* Fix top back panel to wall using 61mm screws. Put
on cover caps.
(for brick/masonry walls)
* Ensure cabinet is in correct position.
* Locate wall studs
* Drill holes in top of back panel at top in correspording
positions to wall studs.
* Using 65mm screws, screw cabinet thru holes in top of
back panel into studs. Put on cover caps
