Pard TA32-LRF, User Manual

Page: 24 / 32

7. Hot Track
20
device will detect any slight heat changes which exceed a set range, devia�on will cause the shu�er to automa�cally
close and the device will perform self-calibra�on. This will improve edge to edge clarity on the image.
Auto shu�er: The system detects the temperature value of the sensor simultaneously. When the change value
exceeds the system se�ng, the shu�er will close and pause the image for about 1 second to perform self-calibra-
�on opera�on.
Manual: The system detects the temperature value of the detector chip in real �me, and uses the built-in algorithm
to calibrate the image in real �me.
Press [Key 4] to move the cursor to the shu�er mode se�ng op�on, and press [ Key 3] to enter the sub-menu.
Press [Key 2]/[Key 4] to move the cursor to select “Auto shu�er" and "Shu�erless" op�on.
Press [Key 3] to save and return to the previous page.
8. Center marking
Press [Key 4] to move the cursor to the center marking op�on, and press [ Key 3] to enter the sub-menu.
TA32-LRF No
TA62-LRF Yes
TA32-LRF No
Shu�er Correc�on
：
Yes
Double press [ LRF ] key to manually execute the shu�er correc�on.
Press [Key 4] to move the cursor to the hot track op�on, and press [ Key 3] to enter the sub-menu.
Press [Key 2]/[Key 4] to move the cursor to select “Off” and “On” op�on.
Press [Key 3] to save and return to the previous page
.