Technical manual-C190CubetapePRO
17
3.
3.1 Overview
This chapter provides information about how to configure the C190CubetapePRO device. It
describes access to the Settings menu where the device can be managed. It also provides
detailed information on configuring Cubetape via the PC based Cubetape Manager software.
3.2 Settings in C190Cubetape
The CubetapePRO has six basic settings, which can be directly accessed on the device.
Upon turning on the device, it automatically functions under default or previously
configured settings.
If a different settings configuration is needed, the operator has to enter the
Settings menu to adjust.
•
To enter the Settings menu, power the device on.
•
When the display is showing the Laser warning screen, press
and
simultaneously
to enter the Settings menu.
3.2.1 Settings Menu
The five buttons on the front and side of the device are used for navigation and selection
purposes under the Settings menu. See Section 1.7.2 for more details.
3.2.1.1 Cubetape Manager software
Plug the USB cable into the host computer (Windows), which has installed the Cubetape Manager
software.
•
Press
and
simultaneously to enter the Settings menu. - the cursor is on
the CubeTapeMgr tab, press
to select.
