50
a. Press and hold any two buttons on the tablet at the same time for more than 3 seconds and then release, the
indicator light will flash 3 times quickly and then go out. At this time, the coordinate mode switch is completed.
b. Long press any two buttons again for more than 3 seconds to switch back to the original mode.
(6) After switching the mode according to your device, you can open the software and use it.
11. How to solve the driver installation error?
If you are running on the Windows operating system and you receive the following error message when you
double-click the "driver" to install, please try the following steps: (Please note: all the prompts that appear "Please close
these programs and re install the process" can be used A similar method ends the process that appears)
1. Right-click the taskbar to open the "Task Manager".
2. Find the process that appears in the prompt box, right-click and select "End Task".
Summary of Contents for Intangbo M
