manualshive.com logo in svg

Paravan PR 50, User Manual

Share
Download
Paravan PR 50 User Manual Download Page 141

Gener

al

Information

Pr

epar

e

Oper

ate

Help

Technology

Systems and technical documentation

141 

Foot rests:

 

›

When adjusting the height and angle of the foot rests, be careful that the height does not make contact 

with the seat padding.

 

›

The foot rest setting must be higher than any obstacle. In addition, the foot rest must not become caught 

up by the obstacle, as this may cause the electric wheelchair to topple over. 

Seat adjustment forward and back:

 

›

When you are moving the seat back or forwards, make sure that the foot supports positioned at a low 

height.

 

›

When driving the electric wheelchair, make sure that the seat is not in its foremost position, as this could 

generate a danger of overbalancing!

Control/Joystick

 

›

Your electric wheelchair is controlled by moving the joystick forwards, backwards and from side to side 

on the control panel

Summary of Contents for PR 50

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands