Paravan PR 50 Page 25 User Manual Download

Page: 25 / 144

Gener

Information

epar

Oper

ate

Help

Technology

Safety note

Safety note

3.1

General safety notes

You must under all circumstances observe the following safety notes for your own safety, for that of people

in your vicinity and to protect the environment.

DANGER!

Danger of crushing by contact with moving parts; e.g.

Through the rotation of the drive wheels or the Lifting move-

ment of the lift arm and the horizontal movement of the seat.

Danger of fall through accidental movement of the electric

wheelchair due to the brake being left off.

Danger of fall through abrupt braking of the electric wheelchair

where the vehicle loses power.

›

Do not make contact with moving parts.

›

Accompanying persons should not make any contact with

danger areas when operating the electric wheelchair.

›

The brake release lever must be in the "LOCK" position.

›

Never switch off or cut off power to the electric wheelchair

while it is moving.

3.1.1

Notes on usage

Summary of Contents for PR 50

















































































































































Search results

Summary of Contents for PR 50

Reviews:

Related manuals for PR 50

Brands by name

Popular brands

Paravan PR 50, User Manual

Search results

Summary of Contents for PR 50

Reviews:

Related manuals for PR 50

Brands by name

Popular brands