Paravan PR 50 Page 35 User Manual Download

Page: 35 / 144

Gener

Information

epar

Oper

ate

Help

Technology

Functional description

4.3.2

Clearance certification as hazardous cargo (accumulator)

PARAVAN GmbH uses accumulators that are rated as "non-hazardous cargo" on condition that the relevant

accumulators are not suffering mechanical damage of any type.

The maintenance-free VRLA accumulators and the equally maintenance-free lead gel accumulators are clas-

sified as leak-proof, non-hazardous cargo for any form of transport according to:

›

IATA, Rule A 67

›

ADR, Rule 238 B

›

IMDG, Rule 238.2

UN 2800 Special Provisions.

)

See "Clearance certification as hazardous cargo"

You will receive the appropriate Clearance certificate for your accumulators during the handover of

your wheelchair.

Summary of Contents for PR 50

















































































































































Search results

Summary of Contents for PR 50

Reviews:

Related manuals for PR 50

Brands by name

Popular brands

Paravan PR 50, User Manual

Search results

Summary of Contents for PR 50

Reviews:

Related manuals for PR 50

Brands by name

Popular brands