Paravan PR 30 User Manual Download Page 146

Page: 146 / 156

Gener

Information

epar
e

Oper
ate

Help

Technology

Systems and technical documentation

146

23.

Systems and technical documentation

22.2

Replacement parts

The replacement of original parts by thirdpary components or by reproduction (copied) original parts

is strictly forbidden! Obtain your spare parts exclusively from your dealer or from PARAVAN GmbH.

)

See Section "1.1 Your manufacturer"

WARNING

Danger

of personal injury when operating the electric

wheelchair in a state not conforming to its state upon delivery.

Material damage

to the electric wheelchair through non-au-

thorised or incorrectly installed components.

Do not make any technical changes to your electric

wheelchair.

Only operate your electric wheelchair in its original state

upon delivery.

Use only original or authorised replacement parts.

Summary of Contents for PR 30





























































































































































Search results

Summary of Contents for PR 30

Reviews:

Paravan PR 30, User Manual, Page: 146 / 156

Search results

Summary of Contents for PR 30

Reviews: