DEVICE MAINTENANCE AND CLEANING
TRAINING
36
©
Parata
2014
How to Maintain the Paper Path and Change the Paper
4.
Remove the tape and paper
from the empty paper spool.
5.
Place new paper roll on the paper spool disk
, be sure that the ridged or open side of
the paper is facing towards the paper spool disk.
6.
Lay the existing paper inside of the new paper
with about a 1 ½ inch overlap. (Old
inside new – this is critical, otherwise the paper can separate when going through the
second shutter. Again, be sure the existing and new paper line up. Use a credit card or
ID badge to give support while taping, to be sure the ends are aligned. Using 2 small
pieces of scotch tape, tape the topside and underside of the overlapped paper together.
TIP: Make sure the tape is not placed over the open edge of the paper. It is important that this
edge stay open.