Parasound Zhd, Owner'S Manual

Page: 4 / 12

Applications
The Zhd is designed to select up to five HDMI sources and route them to a single HDMI output.
It switches the entire HDMI signal, including video, audio and the critical encryption signal
for copyright protection. It does not decode HDMI signals. It does not alter or degrade
the HDMI signal in any way. The Zhd also includes a switchable HDMI boost function to
increase the strength of the HDMI output when it is attached to a long HDMI cable run.
The Zhd is fully HDCP compliant. You can control the Zhd by the front panel, IR remote,
RS-232 or automatically, by linking it to a Parasound 7.1 Channel Surround Sound Controller
(Halo C 1, C 2, or NewClassic Model 7100).
The Zhd does not have to be visible or accessible unless you wish to operate it manually with
its front panel buttons.
Please read this manual thoroughly before you begin installation.
Unpacking
Carefully unpack your Zhd and these accessories:
•
Detachable AC power cord
•
Remote control handset with two AAA batteries
•
RS-232 control cable with DB9 connectors (for use with Parasound 7.1 Channel Surround Controllers
only; not for use with other Parasound models or house controllers such as Crestron or AMX)
Please inspect the unit now and contact your Parasound Dealer promptly if you see evidence
of shipping damage. Save the carton and packing inserts in case you move or in the event you
need to ship your Zhd for repair. Before you proceed, locate the serial number on the rear panel
or underside of the unit and record it here for future reference:
INTRODUCTION
OWNERSHIP REFERENCE INFORMATION
Parasound Serial Number:
Date of Purchase:
/ /
Name of Dealer:
Dealer Street Address:
Dealer Phone:
( ) -
2