The LFO gate
The 2.0 version PCB has a LFO gate feature added (similar to the
Arcadiator). It turns the LFO off completely when there is no input
signal, so it stays quiet when not playing. The self oscillation from
turning up the gate pot will also turn on the LFO.
To enable or disable the gate, just turn both dip switches on or off.
If you don't have a DIP switch you can either just link the pads to
have the gate on at all times, or just leave the pads unlinked for a
free running LFO (just like the 1.0 version PCB). I suggest leaving
the pads unlinked unless you are having an issue with ticking. Then
add the links.
Link the upper and lower pads to have the LFO gate engaged at all
times, or just leave it unlinked for a free running LFO.
Summary of Contents for Into the Unknown
Page 9: ...Schematic...
