PARASIT STUDIO Into the Unknown, Manual

Page: 5 / 9

Into The Unknown Bill Of Materials (BOM)
•
This PCB is designed for two board mounted LED's, one for
bypass indication and one LFO rate indicator.
•
* These are current limiting resistors for the LED's. Use the
appropriate value for your LED type.
•
The ”LED” hole (next to the output connection hole) should be
connected to the ground for LED bypass on your stompswitch.
Other things not included in the BOM but good to have:
enclosure, input and output jacks, DC jack, led bezels, 3PDT
switch and knobs.
Resistors Capacitors IC's
R1 1M C1 100nF IC1 CD4069UBE
R2 1M C2 4.7nF IC2 CD4015BE
R3 2.2M C3 100nF IC3 CD4046BE
R4 1M C4 33nF IC4 CD4069UBE
R5 10K C5 4.7nF U5 CD4066BE
R6 10K C6 100nF
R7 68K C7 100nF Potentiometers
R8 470K C8 2.2uF GATE C250K
R9 100K C9 100uF MIX B50K
R10 100K C10 220pF SUB B50K
R11 47K C11 6.8nF RATE C50K
R12 47K C12 100nF FILTER A50K
R13 100K C13 22uF LEVEL A100K
R14 220K C14 2.2nF TRACK A500K
R15 220K C15 2.2uF WARP C10K
R16 10K C16 1uF
R17 470K Diodes Switches
R18 1M D1 1N4001 OctDown SPDT on/on
R19 2.2K D2 1N4148 OctUp SPDT on/on
R20* 4.7K-22K D3 1N4148 LFO SPDT on/off/on
R21 10K D4 1N4148 Optional DIP SWITCH:
R22* 4.7K-22K D5 1N4148 2 positions
R23 100K D6 1N4148 (2 switches, 4 pins)
R24 100K
R25 47K 2x LED's