7
PLUMBINg THE ULTRA UV UNIT
All plumbing methods are illustrated with and without the bypass option.
Your ULTRA UV unit will need to be plumbed into the circulation system. The
ULTRA UV unit is plumbed to the discharge side of the filter before the heater.
TYPICAL PLUMBINg WITHOUT AND WITH BYPASS
The inlet is at the bottom of the unit and the outlet at the top. The maximum
operating pressure for the ULTRA UV is 35 psi (2.4 BAR) (Figs. 2).
SERIES PLUMBINg WITHOUT AND WITH BYPASS
Plumbing the ULTRA UV units in a series for large bodies of water with
excessive flow rates (Figs. 2a).
MULTIPLE PORT PLUMBINg WITHOUT AND WITH BYPASS
Be sure to use the appropriate amount of inlets and outlets available on
the ULTRA UV to handle the maximum gpm / lpm rating of the pump that is
circulating through the ULTRA UV unit. Using a bypass is another method
for controlling the maximum flow (Fig. 3).
NOTE: THE ULTRA UV CAN BE PLUMBED WITH OR WITHOUT A
BYPASS. THE BYPASS METHOD IS CONSIDERED TO BE THE
PREFERRED METHOD. IT OFFERS EASIER SERVICINg & REMOVAL
FOR WINTERIzATION WHILE STILL ALLOWINg WATER FLOW.
Fig. 3
Fig. 3
Fig. 2a
Fig. 2a
Fig. 2
Fig. 2
