16 MS-1000 PT2.fm
8. ATTACH ADJUSTMENT LABEL
B5000
1. Make sure pulley housing is in the 10th
position up from the bottom.
2. Clean the label area on the upright with
isopropyl alcohol. Wipe dry with a clean
cloth.
3. Carefully remove the backing from the
label.
4. Working from the center of the label, line
up number (13) with the arrow on the
pulley housing.
5. Working upward from number 13, press
the label lightly onto the upright frame
being careful to keep the label centered.
6. Working downward from number 13,
press the label lightly onto the upright
frame being careful to keep the label
centered.
7. Adjust the pulley housing through the
entire range to check that the indicator
lines up with numbers (1) and (22).
8. Firmly press the label to the upright.
