9
5.
Attach Reflector (A) to top of Supports. Align holes in bottom of
Reflector with Supports and slide Reflector down over Supports.
6.
Secure Reflector to Supports with 4 pieces A - M8 Nut.
Tighten with an open end wrench.
Hardware Used
: 4 x A, M8 Nut
8.
Assemble Glass Tube. Locate Glass Tube Connector (F) and
7. Place Top Cap (L) into Reflector.
two pieces of Glass Tube (G). Carefully insert one end of Glass
Tube Connector into open end of Glass Tube and then repeat with
other Glass Tube.
9.
Insert Glass Tube into Emitter and Tank Housing/Base
Assembly. Carefully insert assembled Glass Tube into end
of Emitter and then into hole on top of the Tank Housing/Base
Assembly.
ASSEMBLY
5
6
8
7
9
