Paramount Fitness FP-285, Instruction Manual

Page: 9 / 21

9
ASSEMBLY INSTRUCTIONS
9
ASSEMBLY INSTRUCTIONS
3. Place Table Top -C so underside is facing up on an even
soft. clean surface.Screw 4-Studs -K into the Table Top -C
using the Screwdriver -R .Then turn the Table Top over,
and align the Studs with the holes in the top of legs.Slide
Washer/Spring Washer/Nut L over the end of the Stud-K
and secure with Nut-L . Tighten with Wrench -S .Place the
burner -B into the hole in the Table Top -C . Make sure the
Control Knob on the Burner is aligned with the Door Panel.
4
.
Pour the Fire Glass-J around the burner. Be careful not
. to obstruct pilot light housing.Put the Removable burner
Cover -A on the burner. When the fire pit is NOT in use or
after use, when the fire pit has cooled COMPLETELY,
cover it with the Protective Cover -I .
DO NOT PUT THE
PROTECTIVE FIRE PIT COVER ON A HOT FIRE PIT.
Hardware Used
K
L
L
L
S
Spring Washer(M8)
Nut(M8)
Wrench
Washer(M8)
Stud （ 8*30mm ）
X 4
X 4
X 4
X 4
X 1
3
4